BathroomShower Enclosures

7 Glass Shower Enclosure Design Tips

If you are remodeling your bathroom, you may be interested in creating a customized glass shower enclosure. These beautiful showers can give your plain bathroom a spa-like feel, making it a great place to relax at the end of a hard day. In order to get the most out of your glass shower enclosure, it is important to use some important design tips.

Shower Door Swing Direction

When you are planning out your glass shower enclosure, it is crucial to ensure that your door swings the correct direction. Most municipal building codes will require that all shower doors on hinges must open outwards. A hinged door that only swings inward isn’t permitted by code, and in addition to creating an unsafe situation, you will run into some major problems if you attempt to sell your house in the future.


It is important to ensure that your glass shower doors are installed so that nothing disrupts their movement. Overhanging tiles or raised tiles can interfere with the swing of your door, as can marble seating. While your tile can be modified so that your door can operate properly, you might need to apply a filler, which may not be aesthetically appealing.


In terms of shower hardware, most components are designed to accommodate angles of 180, 135, and 90 degrees, although 135 degree angles are ideal. Keep these angles in mind when planning your design, as using them can help to ensure that your enclosure functions properly and that installation is a cost-effective process.

Shower Head Position

It is important to position your showerhead in a comfortable location, while taking the height of your family members in mind. Creating your own customized shower enclosure is a great opportunity for tall homeowners to get a shower head that works for them. In order to minimize leakage, be sure to position the showerhead toward the wall, and never position it opposite of the door.

Plan Seating Properly

It is important to plan your in-shower seating properly in order to ensure adequate drainage and to avoid flooding problems. Seats should be pitched so that they shed water, and pans should be installed below the seats. Using a slab is your best option for pitching curbs into your enclosure to allow proper drainage.

Curb Pitch Considerations

A curb at the bottom of your shower that is pitched outwards is a major problem, as it will spill water away from your shower enclosure and onto your bathroom floor. A dead-level curb can also be problematic, as it can lead to standing water that might produce mildew and mold. To avoid these problems, slant your curb inward at a five degree slope. This will cause water to flow inward toward your drain rather than into your bathroom.


Before you install your new hinged, glass shower door, make sure that the wall behind it has proper studding support. It is also important to ensure that wood blocking or studs are provided where the doors hinges in order to ensure maximum support.

Call Frameless Shower Doors Buford GA CHC Glass & Mirror Today – We’ll Get You Set Up!